Sandless Franchise

Sandless Franchise

Floor Finishing, Refinishing, and Sanding

Sanding provides a method for smoothing an installed floor, compensating for unevenness of the subfloor. Additionally, sanding is used to renew the appearance of older floors.Sanding using successively finer grades of sandpaper is required to ensure even stain penetration when stains are used, as well as to eliminate visible scratches from coarser sandpaper grades used initially. Prior to modern polyurethanes, oils and waxes were used in addition to stains to provide finishes. Beeswax and linseed oil, for example, are both natural crosslinking polymers are hardened over time. Modern polyurethanes, and polyester resins, used occasionally, are superior in toughness and durability.

"I wanted to thank you for the job your company performed at the Keystone Center last weekend. The hardwood floors at the Center were extremely dirty, damaged and in a state of ugliness! Your service brought back the floors to their original condition. The hardwood floors are original and were first installed over 80 years ago. The floors look brand new. Your crew did a great job of working around our schedule and making certain that there was no disruption with our operation and patient service." – Kevin Williams, General Manager KeyStone Center, Universal Health Services, Inc. 
Sandless Franchise 
Applying stains can be very easy or very difficult depending on the type of substrate, type of stain, and the ambient conditions. Fresh, "green" lumber accepts stain poorly, while aged wood absorbs stains relatively well. Porosity of wood can vary greatly, even within the same piece of wood. End grain and bias-cut grain are far more absorbent, thus will accept more pigment and will darken considerably in those areas. The hard ring may absorb differently from the soft ring. The characteristic medullary rays in oak will absorb much less and remain mostly blonde. Woods that have been heavily subjected to paint strippers or washed down with detergents or solvents will have an increased open grain and accept substantially more stain than normal. Woods from different species of trees can have huge variations in how well they take stain. Stains that are fast drying will be difficult to apply in hot weather or in direct sunlight. Stains that are slow-drying will be difficult to work with in damp and cold conditions due to a greatly lengthened evaporation and curing period. New lumber, such as pine, can have waxlike sealants put on at the mill that will prevent proper staining; stripping or sanding the surface may be required. White stains composed of metal oxides, namely titanium dioxide and zinc oxide do not penetrate well and remain on the surface. In such cases, wear easily reveals unstained wood. They are also fairly opaque.



Find More Sandless Refinishing Hardwood Floors Articles

Technorati Tags: , , , , , , , , , ,

Any tips for spot finishing old wood floors?

Question by Erin K: Any tips for spot finishing old wood floors? I live in an older apartment building probably built in the 60's that has old wood floors. I'd like to refinish a couple spots that i have damaged (leaky potted plants). I purchased a fast drying polyurethane clear gloss, some sand paper and a couple sponge applicators. i've finished some wood before but never had to match preexisting finish. 1) is this the right color polyurethane (gloss is most common yes?)? 2) any tips for keeping the look consistent with the undamaged floor around it? Best answer:

Answer by altterrain
If they floors are really old (pre 1970) they are most like finished with a varnish. A polyurethane finish will not match. -Brian

What do you think? Answer below!

Technorati Tags: , , , , , , , , , , , , , , , , ,

Learn More About Hardwood Floor Refinishing in Colts Neck, Middletown, Red Bank

In Colts Neck, Middletown, Red Bank For those who adore the hardwood floors in their homes, the refinishing comes as a routine task so that the floors will be maintained properly to look new and sparkling. Refinishing hardwood floors can sometimes be a tedious task, which can consume lots of money and time. But this is the price you need to pay to maintain your precious flooring.

While you consider refinishing, you will be astonished to know that this is a task that you can do yourself without paying professionals high amounts of money to do it for you. But it would be worth to understand that you would need to have time to spend on your refinishing project to make sure that you end up with the effect you wanted to achieve.

Hardwood floor refinishing is definitely a time-consuming project, if you want to do it by yourself. However, it does require you to move out of the home until you complete this task. Also, the coatings for refinishing these floors do not have any strong fumes that may be dangerous for anyone with respiratory problems. But the only thing you will have to remember is not to walk on the floor until the finish is dry.

If you forget our advice and jump on to the freshly refinished floor, your completed task will have your footprints all over it, and believe me it would be in more ways than one. There are many books you can buy on the subject and you can also get many useful resources when you search online.

Now when you have weighed all the possibilities, you can move on to the task. For this project you will need some equipments like the heavy-duty sander that you can always rent from your local supplier. When you begin with the project, you first have to move all the furniture and take up any rugs or mats that you have on the wood floors. If you have some sort of allergy with the dust, you need to wear a dust mask so that you won't breathe in the dust coming out.

The most important equipment you will need for this project is the heavy- duty sander. When you use one, move gently back and forth over the wood floors. Move the sander in a straight line similar with the pattern of the hardwood boards. Try not to go across, if the flooring has a beveled edge with small grooves. services area Colts Neck, Middletown, Red Bank

Also do not apply additional pressure in one place that in another. This will help you to avoid taking out the gouges from the floor. When the first finish is sanded off, you have to sweep or vacuum up the dust and give the floor a light washing.

This will help you avoid the staining marks if dust is present on the floor. When refinishing wood floors, it is essential that the first coat is dry before you apply another coat. The more coats you put on, the shinier your floors will be. But at the same time will more coats will result in added cost.

If you are thinking about hardwood floor refinishing then come to Harwoodflorrs-refinishing for tips and information.

Technorati Tags: , , , , , , , ,