Haven Hardwood’s How to Sand and Refinish Your Floor Guide

Thursday, July 7th, 2011 at 5:36 am

Comments Off

Haven Hardwood’s How to Sand and Refinish Your Floor Guide

Free Online Articles Directory

Why Submit Articles?
Top Authors
Top Articles
FAQ
ABAnswers

Publish Article

0 && $.browser.msie ) {
var ie_version = parseInt($.browser.version);
if(ie_version Login

Login via

Register
Hello
My Home
Sign Out

Email

Password

Remember me?
Lost Password?

Home Page > Home Improvement > DIY > Haven Hardwood’s How to Sand and Refinish Your Floor Guide

Haven Hardwood’s How to Sand and Refinish Your Floor Guide

Posted: Oct 13, 2008 |Comments: 0
| Views: 102 |

]]>

Haven Hardwood’s

How to Sand and Refinish Your Floor

Guide

Steps

•1.) Safety.

•2.) Determine if you have hardwood flooring.

•3.) Remove any layers of carpet or sub-floor.

•4.) Rent the equipment.

•5.) Sanding with the floor belt sander.

•6.) Sanding with the edger sander.

•7.) Scraping.

•8.) Screening.

•9.) Vacuuming.

•10.) Picking the right finish.

•11.) Applying the finish.

•12.) Screening between coats.

•13.) Floor care.

1.) Safety

The first and most important step is safety. When doing any of the following steps I highly recommend the importance of safety and/or preventive gear such as safety goggles, ear plugs, respirators, work gloves, back brace and knee pads. You only have one body so please take care of it!

2.) Determine if you have hardwood.

Do you even have hardwood that is capable of being refinished? There are a couple ways to find this out. If you have carpet simply tear up a couple corners in an inconspicuous place, such as a closet and peek underneath.

If you don’t have a finished basement ceiling you can sometimes see the flooring from there. Sometimes you can even see the species and grade of wood from below. It gets tricky from there if your floor is covered with tile, linoleum or another sub-floor. If you can not see anything from the basement then you will have to tear up a small section of the sub-floor to reach the hardwood.

3.) Remove any layers of carpet or sub-floor.

Take a sharp razor knife and cut the carpet in three feet wide sections. Roll up the sections and tape. Most garbage companies won’t take carpet any wider than three feet. Do the same with the carpet padding. Next, grab a crowbar, hammer, nail set and snub-nosed pliers. Pop the carpet tack strip up, being careful to pull any nails or staples all the way out. If you don’t they could damage your sanding machine and dull your sandpaper. Any nails that can’t be pulled need pounded down with a hammer and nail set. Vacuum thoroughly.

Wood Sub-Floor Removal

Grab a circular saw and set it to the proper depth of your sub-floor. Make sure not to set it too low, as it will leave saw marks in your floor. Cut lines across the room, then cut lines perpendicular to those, making 2′ by 2′ boxes in a grid-like fashion. Cut as close to the walls as you can for easier removal. Pop the 2′ by 2′ sections up. You can buy a “Gorilla Bar” at a home improvement center if you have a lot of removal work. Be prepared to pull a lot of nails and/or staples.

4.) Rent the Equipment.

Call your local rental equipment company and explain your project. You will need a floor sander, edger and buffer. You also need the lowest available grit sandpaper, medium (36 grit) and fine (80 grit) for the floor sander and edger. For the buffer you need an 80 grit screen (like a drywall screen, except it’s round) and a 180 grit screen. Make sure to get more paper than you think you will need. The rental company should let you return any leftovers.

5.) Sanding with the Floor Sander.

Before you start sanding you need to fill any holes caused by the nails and staples. Buy stainable latex wood putty and fill the holes with a putty knife. The putty should take about thirty minutes to dry.

Grab your lowest grit paper and put it on the big machine. Most rental companies only carry down to 36 grit paper, but if you have any lower grit paper put that on first. Making sure that the machine’s cord is behind you, turn the machine on and slowly let the drum handle down as you simultaneously begin walking toward the wall. Make sure to always go with the grain of the wood. Occasionally, in exceptional circumstances you may have to sand the floor diagonally. This may be the only way to get the floor sanded in extreme cases.

After the first rough cut you need to sand with a medium grit. If you started with 36 grit then you would use 60 grit. If you started with a grit lower than 36 your second sanding should be with 36 grit.

Especially pay attention to the “drum marks”. These are lines where you put your drum down too fast and hard. If you get one, simply run back over it with the machine a few times.

The final cut is the fine sand. Go up another grit of paper, 80-100 grit. Follow the same sanding procedures as above.

6.) Sanding with the Edger Machine.

Sanding with the edger machine consists of using the same sandpaper as what you are using for the big machine. When you fine sand with the edger make sure to get the previous swirl marks from your rough sandpaper out. Don’t push down too hard on the machine, as this will leave gouge marks. Watch when sanding around doorways so as not to leave “half-moons”. These are just from when the machine stops and leaves half of a circle mark.

7.) Scraping.

Now that the floor and edge sanding is completed, it’s time to scrape. Anywhere your machine can’t reach (corners, under cabinets or radiators and stair noses) needs to be hand-scraped down to the bare wood. You can purchase a 2″ wide scraper from any home improvement supply store. A bastard file is used to sharpen the scraper blade. Keep the blade as sharp as possible. Remember to always scrape with the wood grain. You have to scrape any old, existing finish off the floor completely so it will match your newly sanded floor. If your are meticulous and worried about rough spots where you scraped, just take an 80 grit piece of sandpaper and lightly sand where you scraped.

8.) Screening.

Screening is a process used to sand and smooth out any marks or imperfections. An 80 grit screen will work fine for the raw wood. Try to rest the machine handles on your belly. Don’t try to hold the machine out, away from your body. You will lose control if you do it this way. Try to go with the grain as much as possible.

9.) Vacuuming

This stage is vital in order to complete a flawless finish process. Get a vacuum (a simple wet/dry vac will work) with a flat floor attachment. Vac everything. Start at the top (ceiling fans, moldings, windows door sills, heat vents and registers). You don’t want any airborne dust floating in your finish so make sure to get everything! Next, move to the floor. Once again, try to go with the grain.

When this is completed lightly dampened a rag with mineral spirits (paint thinner) and wipe the floor clean. This should pick up any tiny particles which would otherwise impede the integrity of the finish on your floor. During this step I recommend you shut all windows and either take your shoes off or wear protective shoe booties.

10.) Picking the Right Finish

There are three choices here for the first finishing step: a.) Stain, b.) Oil-based polyurethane or c.) Water-based polyurethane.

a.) Stain

This is used when you want to change the natural color of your floor. It can be used to diminish the visibility of water or pet stains as well. I have always used Minwax stains and never have had a problem. After sanding make sure to put samples down on the floor to determine the color of your liking. Don’t go by a color guide on a sheet of paper. Wood color fluctuates so your floor will be unique.

This stain takes 8-12 hours to dry, so another coat can’t be applied until the next day. Keep in mind that the smell of this stain is strong. In order to get rid of the smell crack windows and keep air flowing. After staining the floor it will still need 2-3 more coats of urethane.

b.) Oil-Based Polyurethane

This is used to maintain the “natural” appearance of the floor. It does slightly tint the wood to a light, amber, honey color. Oil takes 8-12 hours to dry and smells very bad. Complete curing time takes 14 days.

c.) Water-Based Polyurethane

This is used when you want the true natural color of the floor. Wet a rag with water and wipe a small section on your raw floor. That resultant color is the same as water-based finish. I recommend this finish because of it’s low smell and fast drying time (2-3 hours). Curing takes 7 days for this finish.

11.) Applying the Finish.

a.) Stain.

Grab a lot of old rags without buttons or zippers. Dip your rag in the stain and wipe in a circular motion out three feet from the wall. When you have one section done take a clean rag and wipe the stain. Watch for overlap marks. You want everything to be even, not splotchy. Continue this as you work your way out of the room.

b.) Oil-Based Polyurethane

Buy an oil-based lamb’s wool applicator. Dip your applicator and cover the floor in a back and forth motion, up and down. Oil finish is more forgiving of mistakes and lets you have more time.

c.) Water-Based Polyurethane

Buy a synthetic water-based applicator pad. Pour a basketball size puddle by the wall and work in three feet sections until you get comfortable to do more. Just be careful not to get ahead of yourself because any finish that is left sitting will dry and “burn” the wood. If there are bubbles in your finish this means that your applicator has too much finish in it. Just run back over the area again.

12.) Screening between Coats.

a.) Stain

Stain needs another coat of urethane before screening with 180 grit screen. When screening a stained floor it is important to move quickly so you don’t buff any of the color off the floor. This step just needs to knock the grain down and abrade the previous coat of urethane so that it will adhere properly. Vac according to the instructions in step 9.).

b.) Oil-Based Polyurethane

Oil finish screening takes place after your second coat, before the last coat. Once again use 180 grit. Vac and coat according to instructions.

c.) Water-Based Polyurethane

This finish can be screened after the first coat with 180 screen. It shouldn’t need screened again unless 24 hours has passed. Vac and coat.

13.) Floor Care

Any laying water can warp and damage your hardwood floors. Wipe up any liquids.

Grit is the hardwood floor’s number one enemy. Sweep regularly and use doormats at any entrance. Never use a vacuum with beater bars!

Always lift furniture to avoid scratches. Do not slide! We recommend putting felt pads under all your furniture. High heels can dent some hardwood floors, especially recently refinished ones.

Never wax your hardwood floors!

Only clean hardwood floors with approved PH neutral cleaners. Never saturate your floors with liquids when cleaning. Just lightly dampen your cleaning materials and wipe.

Floors can be walked on and furniture may be moved back the following day after coating. We recommend not putting area rugs down for 7-14 days until the floor has completely cured.

If you have a pet dog, it’s nails should be clipped short enough as not to cause scratches when it runs.

Do not tape directly to the floor. There is a chance that the adhesive from the tape can pull the finish right off the floor.

Retrieved from “http://www.articlesbase.com/diy-articles/haven-hardwoods-how-to-sand-and-refinish-your-floor-guide-601594.html”

(ArticlesBase SC #601594)

Watch your traffic increase just by submitting articles with us, click here to get started.
Liked this article? Click here to publish it on your website or blog, it’s free and easy!

Andrew Matotek -
About the Author:

Co-owner of Haven Hardwoods, Inc. located in Beaver Falls, PA. Andrew has over a decade of hardwood floor experience. He can be reached at andrew@havenhardwoods.com. If you would like to read more about Andrew’ background check out his website at www.havenhardwoods.com and click on “About Us”.

]]>
Questions and Answers

Ask our experts your DIY related questions here…

Ask

200 Characters left

How many times can hardwood floors be refinished ?
How many staples for hardwood floor ?
New carpet and hardwood floors can they qualify for 2010 if we install now in November? for a tax incentive?

Rate this Article

1
2
3
4
5

vote(s)
4 vote(s)

Feedback

Print

Re-Publish

0) {
ch_selected = Math.floor(Math.random()*ch_queries.length);
if(ch_selected == ch_queries.length) ch_selected–;
ch_query = ch_queries[ch_selected];
}
}catch(e){
ch_query = document.title;
}
]]>

Source: http://www.articlesbase.com/diy-articles/haven-hardwoods-how-to-sand-and-refinish-your-floor-guide-601594.html

Article Tags:
hardwood floor refinishing, sanding floors, haven hardwoods, inc, floors, how to, diy, pittsburgh, pa, hardwood floor contractors

Related Blogs

Technorati Tags: Floor, Guide, Hardwood's, Haven, refinish, sand

Hummel FLIP Hardwood Sanding Edger

Friday, June 3rd, 2011 at 5:36 pm

Comments Off

Most popular hardwood sanding eBay auctions:

[wprebay kw="hardwood+sanding" num="0" ebcat="all"]
[wprebay kw="hardwood+sanding" num="1" ebcat="all"]

[wprebay kw="hardwood+sanding" num="2" ebcat="all"]

Related Blogs

Incoming search terms:

hummel hardwood
hardwood sanding ebay
hardwood sanding hummel
Hummel Hardwood floor refinishing
wood floor refinishing bid

Technorati Tags: Edger, FLIP, hardwood, hardwood sanding ebay, Hummel, Sanding

Is engineered floor more scratch resistant than hardwood?

Wednesday, April 6th, 2011 at 2:35 am

Comments Off

Is engineered floor more scratch resistant than hardwood?

Is engineered floor more scratch resistant than hardwood?

Free Online Articles Directory

Why Submit Articles?
Top Authors
Top Articles
FAQ
ABAnswers

Publish Article

0 && $.browser.msie ) {
var ie_version = parseInt($.browser.version);
if(ie_version Login

Login via

Register
Hello
My Home
Sign Out

Email

Password

Remember me?
Lost Password?

Home Page > Home Improvement > Remodeling > Is engineered floor more scratch resistant than hardwood?

Is engineered floor more scratch resistant than hardwood?

Edit Article |

Posted: Oct 06, 2010 |Comments: 0
| Views: 195 |

]]>

Different types of various flooring are available now on the world market concerning to meet the demands of nowadays active lifestyles. There is always too much information about wood flooring. It makes hard sometimes to know exactly what is what. You may wonder what the difference is between purchasing one kind of floor or another. From the basics of the wood flooring, the engineered floor and hardwood flooring can be marked out. The both types of floor are durable and beautiful, have its benefits and disadvantages.

You can often hear that the engineered floor cannot be refinished as often as the hardwood floor. The deep scratches and dents can be sanded out in hardwood, but it may not be possible in engineered wood. To find out more about this statement is good to know the structure of engineered floor and hardwood.

Engineered flooring

Engineered wood is made from three to five layers of hardwood, by attaching the thinner pieces of hardwood and layers then on the top of each other to a softwood base, often with a plywood bottom. The cris – cross effect makes this type of hardwood floor able to withstand more weight, force and heavy traffic. All layers are bonded together under heat and pressure that is why the engineered floor is strong, stable and long-lasting product.

A hard surface on the engineered floor prevent from forming scratches even if you drag the furniture across the room. This will not damage the floor. It is stronger alternative than solid wood flooring. However, the top layer in engineered floor is thinner than in the solid hardwood, though it as a protective coating. The small scratches can be sanded out, but the deep ones are hard to be repaired.

There are many kinds of engineered wood. You just have to go to a store to see the differences in all of the different types of floors available. The disadvantage of the engineered floor is that can be sanded no more than 1 – 3 times, depending on the thickness of the finish layer. Engineered wood flooring is less affected by changes in humidity and can be installed at all levels of the home.

Solid Hardwood flooring

This wood is made from thick piece of hardwood. Its thickness, gives to the hardwood the possibility to be sanded and refinished over several times. According to the changes in your home, the hardwood will expand and contract. In case the expansion gap is left between the floor and the wall this will not cause any problem. The extra space is covered by molding.

Hardwood species all have different hardness ratings, when considering scratch resistance you should consider what kind of finish has been used and how scratch resistant the finish is. Some floors have more durable finished than others do. The gloss level can also add to the floor the ability to show or hide scratches more or less. Most pre finished hardwood floor is generally very durable and installed make great floor for leaving.

Considering buying one from the great varieties of flooring options, try to make the best choice. The most important is to find the product that will exactly meet your budget, needs, and suit to the lifestyle and entire home’s design. In this way eventually, there is no need to worry about scratches and maintenance.

Retrieved from “http://www.articlesbase.com/remodeling-articles/is-engineered-floor-more-scratch-resistant-than-hardwood-3412220.html”

(ArticlesBase SC #3412220)

Start increasing your traffic today just by submitting articles with us, click here to get started.
Liked this article? Click here to publish it on your website or blog, it’s free and easy!

Victor -
About the Author:

Toronto Hardwood TipTop Flooring is a professional flooring services firm in the Greater Toronto Area (GTA). We are offering hardwood/laminate flooring installation services. Our exceptional services and approach are professional to everything we do. To find more about Wood Floors please visit us on http://www.tiptopflooring.ca/all_about_wood_floors.html.

]]>

Questions and Answers

Ask our experts your Remodeling related questions here…

Ask

200 Characters left

What type of finishes dont show foot prints? looking for hardwood or engineered floor for florida home over concrete and 2nd floor. NO LAMINATE FLOORING
How many staples for hardwood floor ?
New carpet and hardwood floors can they qualify for 2010 if we install now in November? for a tax incentive?

Rate this Article

1
2
3
4
5

vote(s)
1 vote(s)

Feedback
RSS
Print
Email
Re-Publish

Source: http://www.articlesbase.com/remodeling-articles/is-engineered-floor-more-scratch-resistant-than-hardwood-3412220.html

Article Tags:
engineered flooring, solid hardwood flooring, scratch resistant floor, solid wood floor, hardwood maintenance tips, finished hardwood floor, hardwood sanding, durable wood floor, hardwood flooring installation, wood floor finishes

Related Blogs

Incoming search terms:

most scratch resistant hardwood floors
best scratch resistant wood flooring
engineered hardwood vs hardwood scratch resistance
what is the most scratch resistant hardwood flooring
who makes the best engineered wood floors
most scratch resistant engineered vs hardwood floors
which hardwood is most scratch resistant
wood scratch resistant
engineered floor scratches
scratch proof wood floor

Technorati Tags: engineered, Floor, hardwood, More, resistant, Scratch, than

Choosing a Hardwood Floor That Fits Your Needs

Friday, August 20th, 2010 at 4:35 am

Comments Off

Choosing a Hardwood Floor That Fits Your Needs

What is some of the most important things you need to consider when choosing a hardwood floor for your home or business?

There are many factors:

Consider which floor level your new floor is going to be installed

There are several things that you need to consider when you’re looking into purchasing wooden flooring. For instance, you will need to make sure that you choose the right type, style, finish, species and grade for your room. Are you confused already? Sorry! There are just a lot of things to keep in mind while you’re looking at wooden flooring.

As far as type of wood, if you are looking for a floor that is going to be very hardy and will last a long time, you should look at acrylic impregnated floors. These are floors with acrylics injected directly into the floor itself. The result is that you have a floor that is part wood and part acrylic, so it is much harder to damage it. For high traffic areas and businesses, this is a good idea.

The other types of wood floors involve solid or engineered floors. The solid floors are one large chunk of wood for each plank that will go from the top of the floor to the bottom. Engineered floors, on the other hand, will have several flat strips of wood that have been stuck together. This makes a lighter, stronger floor.

You should also decide how you want to install the wooden floor, and this will have a major effect on the style that it has once everything is in place. Strip and plank flooring consist of linear planks that cross the floor from one side to the other. The difference is that strip floors generally have smaller planks in them. Parquet flooring, on the other hand, will allow you to have different designs in the floor based on how the wood is arranged.

You will also have to decide which color and species of wood you want to use. There are many different species of wood that are generally used for wooden flooring, so you will have to choose which one is good for you based on cost and general appearance.

Finally, you will also have to choose from the quality of the wood. Depending on the grade of wood, you will either see very few knot holes, or you will see many of them. Choose grades that show off the characteristics of the wood that you are using in order to give your home a more rustic appearance.

http://www.Extraoneflooring.com

Find More Hardwood Sanding Articles

Incoming search terms:

what to consider when selecting wood floor contractor

Technorati Tags: Choosing, Fits, Floor, hardwood, Needs

Hardwood Floor Refinishing Sandless NJ

Hardwood Sanding Archives

Haven Hardwood’s How to Sand and Refinish Your Floor Guide

Related Blogs

Hummel FLIP Hardwood Sanding Edger

Related Blogs

Incoming search terms:

Is engineered floor more scratch resistant than hardwood?

Related Blogs

Incoming search terms:

Choosing a Hardwood Floor That Fits Your Needs

Incoming search terms:

Consumer Guide for Hardwood Floor Dustless Refinishing

Company Information:

TyKote Dustless Refinishing System

Wood Floor Diagnosis

Popular Search Terms

Recent Search Terms

Popular Terms in Category

Dustless Community Users

Login

Archives

Categories

Recent Posts

Recent Comments